Priced CCTV IP Network Surveillance &
Security Equipment Catalogue
Please ensure you have read & understood our
Terms & Conditions before you browse this Catalogue
|
|
|
|
Bracket pictured not included |
Cat Code:
IR-ILLUM $99
$84
for
mixed order over $1000
Cat
Code: IR-ILLUM/ON SPECIAL
version with IR LEDs
always ON
+ $25
(Ideal for difficult
Back-Lit entrance type situations with Mono or
InfraRed sensitive
Day/Night Colour Cameras)
Ready-to-Use
Plug-In 9 Watt 140 LIGHT EMITTING DIODE INFRA-RED
ILLUMINATOR for Monochrome & InfraRed sensitive Day/Night
Colour Cameras.
Light
Emitting Diodes: 140 pieces,
940 nm wavelength, 60º
radiation angle,
invisible to the naked Eye.
Main Spot
Diameter: ~ 3.2 metres @ 3 metres. Illuminates ~
80% of the width-of-vision with 1/3" Image Sensor & 3.6 mm
Lens.
Control:
Automatic On/Off Night/Day.
Range &
Level-of-Illumination are affected by:
*Power-Input,
Lens Transmittance, Spectral Response & Sensitivity of
Lens/Camera.
*Power
Requirements: 12 ~ 15 Volts DC, 100 ~ 600 milliamps, via 2.1
mm x 5.5 mm DC Socket (center pin = +) on ~ 40 cm cable.
Mounting
Brackets click
here * Mains Power Supplies
here... use
REG15/1.2A for Maximum Output.
Construction:
Plastic Case, LEDs & Control PCB are enclosed behind a clear
cover, not waterproof but suitable for sheltered outdoor use
under eaves etc.
Mounting:
1/4" UNC female thread at rear and compatible with
Camera Mounting Brackets. Dimensions: ~ 120 mm x ~ 160
mm x ~ 39 mm, ~ 260 grams.
Best results
will be achieved by matching the 'Lens' Horizontal
Angle-of-View and the LED Radiation Angle (when the Camera
and Illuminator are positioned at the same distance from
subject).
more |
|
Mounting Bracket included
click here or on image to view full size |
Cat Code:
IR-Illum850 only
$149 !
Ready-to-Use
LED Illuminator for Monochrome & InfraRed sensitive
Day/Night Colour Cameras.
Eighty
Three Light Emitting Diodes, ~ 850 nm wavelength, ~ 80º
radiation angle,
produces a visible dull Red glow.
Main Spot
Diameter: ~ 4 metres @ 3 metres. Illuminates ~ 100% of
the width-of-vision with 1/3" Image Sensor & 2.9 mm Lens.
Range &
Level-of-Illumination are affected by:
Lens Transmittance,
Camera/Sensor Sensitivity & Spectral Response.
Control:
Automatic On/Off Night/Day.
Power
Requirements: 12 Volts DC
or 24
volts ac, ~400 mA DC / ~250 mA ac. Mains Power Supplies
here.... use
REG12/1A or
PS24/2A for long cable runs.
Construction:
Aluminium Housing, suitable for sheltered outdoor use under
eaves etc.
Dimensions/Weight: Click on
drawing at left. ~ 880
grams. Bracket ~ 150 grams.
Best results
will be achieved by matching the 'Lens' Horizontal
Angle-of-View and the LED Radiation Angle (when the Camera
and Illuminator are positioned at the same distance from
subject).
more |
|
 |
Cat Code: IR36-PCB
only $39 !
Ready-to-Use 8 Watt Infrared
LIGHT EMITTING DIODE PCB IR Lamp for Monochrome & InfraRed
sensitive Day/Night colour Cameras.
Infrared Light Emitting
Diodes: 36 pieces, ~ 850 nm wavelength, ~ 70º
radiation angle,
produces a visible dull Red glow.
Main Spot Diameter: ~
2.5 metres @ 3.5 metres. Illuminates ~ 90% of the
width-of-vision with 1/3" Image Sensor & 6 mm Lens.
Range & Level-of-Illumination are affected by:
*Power-Input,
Lens Transmittance, Camera/Sensor Sensitivity & Spectral
Response.
*Power
Requirements: Up to 12 Volts DC, ~ 650 milliamps @ 12 Volts,
2.1 x 5.5 mm DC Socket (center pin = +) on ~ 300 mm cable.
PCB ~ 75 x ~ 90 mm (can be 'cut' to 75 x 82), 50 mm 'Hole'.
Best results will be achieved
by matching the 'Lens' Horizontal Angle-of-View and the LED
Radiation Angle (when Camera and Illuminator are positioned
at the same distance from subject and illumination of full
width is required).
more
|
|
 |
discontinued
Cat
Code: IR-ILLUM/2
only $149 !
Ready-to-Use Super Infrared LED Illuminator for Monochrome &
InfraRed sensitive Day/Night Colour Cameras.
SEVEN 10 mm SUPER Light Emitting Infra Red Diodes, ~ 850
nm wavelength, ~ 20º
radiation angle, produces a visible dull Red glow.
Main
Spot Diameter: ~ 1 metre @ 3 metres. Illuminates ~
80% of the width-of-vision with 1/3" Image Sensor & 12 mm
Lens.
Range & Level-of-Illumination are affected by:
*Power-Input,
Lens Transmittance, Camera/Sensor Sensitivity & Spectral
Response.
Control: Automatic On/Off Night/Day.
*Power
Requirements: 12 ~ 15 Volts DC, 80 ~ 310 milliamps via
stripped & tinned wires, ~ 750 mm Cable.
Mounting Brackets click
here * Mains Power Supplies
here.... use
REG15/1.2A for Maximum Output.
Construction: Aluminium & Plastic, not waterproof but
suitable for sheltered outdoor use under eaves etc.
Mounting: 1/4" UNC female thread at bottom and compatible
with
Camera Mounting Brackets.
Dimensions: ~ 138 mm
x ~ 145 mm, ~ 850 grams.
Best
results will be achieved by matching the 'Lens' Horizontal
Angle-of-View and the LED Radiation Angle (when the Camera
and Illuminator are positioned at the same distance from
subject).
more
|
|
|
|
|
|
|
All
information,
sitemap, specifications and
suggestions relating to CCTV, Security Equipment, Security Camera,
Video Surveillance Cameras, Tiny Pinhole Hidden Spy Covert Security
Video Cameras Closed Circuit Television Cameras, Lenses, Multiplexers,
Quads, Switchers, Monitors, Infrared Illuminators, Digital PC Video
Recording, Image Capture, Inspection, Filters, LEDs, etc in this
catalogue were prepared with the utmost care and every effort has been
taken to ensure accuracy, however we accept no responsibility for
errors or omissions. All material is copyright, copying, reproduction
or distribution is prohibited without our written authority. All
prices, product specifications, offers, terms & conditions are subject
to change without notice. |
|
